Mining environments are the harshest test for hydraulic components. We supply ultra-high-pressure hose assemblies, OEM-compatible fittings, and 24/7 emergency support built specifically for the demands of surface, underground, and drill rig operations.
60K PSI
Max Pressure Rated
ultra-high-pressure assemblies
24/7
Emergency Service
shift-around-the-clock support
100%
OEM Compatible
Komatsu, Cat, Sandvik & more
Same Day
Critical Parts
in-stock ready to ship
Mining equipment operates at pressures, temperatures, and duty cycles that standard industrial supply houses are not prepared for. When a haul truck is blocked on a haul road or a longwall face stops moving, the cost is not measured in hundreds, it is measured in tens of thousands per hour.
We build hose assemblies rated to 60,000 PSI, stock flame-retardant and emulsion-compatible components for underground applications, and maintain the inventory depth to get critical parts to your operation the same day. Mine-site supply is a specialty, not an afterthought.
High pressure, constant vibration, abrasive environments, and temperature extremes demand components built to a higher standard.
Mining runs 24/7. Hydraulic component failures at 3 AM need the same response as failures at noon.
A blocked haul road or stopped longwall face can cost more per hour than the entire hydraulic system being repaired.
We stock products specifically rated for mining, not repurposed general industrial supply.
Six capabilities built for the real demands of surface, underground, and drill rig mining operations.
Underground mining environments place extreme demands on hydraulic components, confined spaces, high humidity, constant vibration, and the need for absolute reliability where service calls are difficult and costly.
Surface mining operations run some of the largest hydraulic equipment in any industry. We supply hose assemblies and fittings for draglines, shovels, haul trucks, and surface drill rigs.
Drill rigs operate under some of the most demanding hydraulic conditions, high pressure, constant motion, and exposure to abrasive environments. We build hose assemblies specifically rated for drill rig feed, rotation, and pull-down circuits.
Longwall shearer and hydraulic roof support systems are critical to continuous underground coal and mineral production. A single hose failure in a longwall system can halt an entire face.
Mining haul trucks are among the most expensive pieces of equipment on any mine site. A hydraulic failure on a 300-ton haul truck doesn't just idle the truck, it can block an entire haul road.
Mining operations run around the clock, and equipment failures don't wait for day shift. Our emergency breakdown response is staffed 24/7 with the inventory and expertise to get your machines back in service fast.
Purpose-selected hydraulic components for the extreme demands of mining equipment and operations.
Ultra-high-pressure hose assemblies for drill rigs and hydraulic rock breakers operating at extreme working pressures.
Large-bore, high-pressure hose assemblies for Cat 793/795, Komatsu 930E, and Liebherr haul truck steering circuits.
High-cycle, abrasion-resistant hose assemblies for drill rig feed, rotation, and pull-down circuits on surface and underground rigs.
Flame-retardant, emulsion-compatible hose assemblies for longwall shearer drum motor and ranging arm circuits.
High-pressure, water-glycol compatible hose and fittings for underground hydraulic roof support leg and advancing systems.
Heavy-duty fittings and adapters for hydraulic tensioning systems on mine conveyor belts and drive stations.
Replacement hose assemblies for wheel loader lift, tilt, and bucket circuits, Komatsu, Caterpillar, Volvo, and Liebherr.
Stainless steel ORFS fittings for high-corrosion underground and wet-mining environments where carbon steel fittings fail prematurely.
We're not a general industrial supplier who happens to sell hose. We're a specialist who understands what mining equipment demands.
We stock and build hose assemblies rated up to 60,000 PSI for the ultra-high-pressure applications found in drill rigs and mining rock breakers.
We coordinate delivery directly to your mine site or surface facility, because driving an hour to a supply house isn't an option when a haul road is blocked.
Our assemblies are built to OEM pressure ratings and dimensions for Komatsu, Caterpillar, Sandvik, Epiroc, and all major mining equipment brands.
Mining doesn't stop for shift changes, and neither do we. Our emergency line is staffed around the clock by people who understand mine-site urgency.
Call our emergency line directly. Real people, real response, critical parts shipped same day.
Let us assess your operation's hydraulic needs and build a dedicated supply program. We'll identify critical assemblies, pre-kit emergency replacement sets, and establish the replenishment structure your mine-site maintenance team needs.